Ürün Detay

The Deneyap Kart

Product code: 00002

The Deneyap Card, which was developed using the engineering resources of Turkey, is at your service for projects at all levels from the beginner level to industrial applications in the fields of Electronic Programming, the Internet of Things (IoT) and Artificial Intelligence, with its powerful processor, durable design, and versatile input / output pins.


318 TRY

The versatile and powerful electronic development card of the Deneyap family has been developed using the original ESP32-WROVER-E module.

The card has powerful dual core Tensilica Xtensa LX6 microprocessor. You can start machine learning and AI-based projects with Tensorflow Lite.

You can launch Internet of Things and cloud-based projects thanks to its built-in Wi-Fi and Bluetooth communication features.

You can exchange data between your system and your cloud-based application utilizing the Wi-Fi communication feature. You can set up a closed loop wireless communication network by using the Deneyap Card as a server.

You can exchange data with devices that have BLE and Bluetooth EDR infrastructure thanks to the dual mode Bluetooth feature. The Deneyap Card makes it convenient for you to carry out Internet of Things projects. Thus, you can build applications in the areas smart home, smart farming, smart vehicles, mobile health, etc.

There is an integral high precision LSM6DSM sensor in the Deneyap Card. You can measure 3-axis acceleration and 3-axis rotation and monitor the temperature of your system with the sensor.

Not only does the Deneyap Card let you detect the intensity of the surrounding sounds, but it also allows you to develop speech and voice recognition applications thanks to its built-in MP34DT05 microphone with MEMS technology.

It has a rich connection interface such as UART, I2C, SPI, I2S, Ethernet, SDIO, Capacitive Sensor. In addition, to provide flexibility, some of these connection interfaces can be used from any pin based on the requirement.

It has 24 pins which can be used for general purposes. Among these pins, those used as digital input / output are protected with PTC fuse against over current.  

A special Li-Po connector is available to help you power your system securely. Moreover, you can charge your Li-Po battery using the connector.

You can connect the Deneyap Camera directly to the (FPC) connector on the Deneyap Card.

In addition, there are 2 buttons and 1 RGB LED internally.

You can quickly realize your system consisting of sensor and actuator units using the I2C communication connector. There will be no need for cable connection and soldering.

You can get 3.3V and 5V voltage outputs from the Deneyap Card to use in peripherals that you will provide uninterrupted external connection. There will always be 5V voltage power output ready even when you feed your system with the Li-Po battery. 

The Deneyap Card has a design compatible with the breadboard. Its pins have already been soldered for you so you can start developing instantly.

The Deneyap Card is compatible with Arduino IDE. You can start coding using the instructions.


  • 240 MHz Dual Core Tensilica LX6 Microprocessor
  • 520 KB SRAM
  • 128 KB ROM
  • 8 MB PSRAM
  • 4 MB SPI Flash
  • 2.4 GHz Wi-Fi – 802.11b/g/n
  • Bluetooth EDR and BLE
  • Internal PCB Antenna
  • Three-axis Gyroscope and Three-axis Accelerometer with LSM6DSM
  • MP34DT05 MEMS Microphone
  • RGB LED (Pins: RX, TX, SDA)
  • Button for General Purposes (Pin: GPKEY)
  • Li-Po Battery Charger
  • Li-Po Battery Connector
  • USB Micro-B
  • I2C Communication Connector
  • 24 x Digital Input / Output Pins
  • 16 x Analog Input Pins (12-bit ADC)
  • All Digital Input / Output Pins Support UART, SPI, I2C Communication Interfaces and External Interrupt
  • All Digital Output Pins Support PWM
  • 3.3V Operating Voltage
  • 3.3V and 5V Output Voltage
  • 3.3 - 5.5V Input Voltage
  • 63.50mm x 25.4mm x 15.70mm


This space for this product is not yet available.

You may be interested