Ürün Detay

The Deneyap Mini

Product code: 00004

The Deneyap Mini is the smallest Deneyap Card member that you can start coding with wireless communication (Wi-Fi) infrastructure.


80 TRY

The Deneyap Mini has been developed using the original ESP32-S2 integrated microprocessor.

You can exchange data between your system and your cloud-based application utilizing the Wi-Fi communication feature. You can set up a closed loop wireless communication network by using the Deneyap Mini as a server.

It has a rich connection interface such as USB OTG, SPI, UART, I2S, I2C, Capacitive Sensing. In addition, to provide flexibility, some of these connection interfaces can be used from any pin based on the requirement.

You can quickly realize your system consisting of sensor and actuator units using the I2C communication connector. There will be no need for cable connection and soldering.

In addition, there are 2 buttons and 1 5050 RGB LED internally.

It has 22 pins which can be used for general purposes.

The Deneyap Card has a design compatible with the breadboard. Its pins have already been soldered for you so you can start developing instantly.

The Deneyap Card is compatible with Arduino IDE. You can start coding using the instructions.

  • Single Core 240MHz Tensilica Xtensa LX7 Microprocessor
  • 4 MB SPI Flash
  • 320 KB SRAM
  • 128 KB ROM
  • 2.4 GHz Wi-Fi – 802.11b/g/n
  • Internal PCB Antenna
  • 5050 RGB LED (Pins, LEDR, LEDG, LEDB)
  • Button for General Purposes (Pin: GPKEY)
  • USB Mikro-B
  • I2C Communication Connector
  • 22 x Digital Input / Output Pins
  • 10 x Analog Input Pins (13-bit ADC)
  • All Digital Input / Output Pins Support UART, SPI, I2C Communication Interfaces and External Interrupt
  • All Digital Output Pins Support PWM
  • 3.3V Operating Voltage
  • 3.3V and 5V Output Voltage
  • 3.3 - 5.5V Input Voltage
  • 50.00mm x 20.32mm x 12.96mm

This field is not yet available for this product.

You may be interested