#include "deneyap.h" const int trigPin = D0; const int echoPin = D1; long duration; int distance; void setup() { pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); Serial.begin(9600); } void loop() { // trig pini sıfırla digitalWrite(trigPin, LOW); delayMicroseconds(2); // 10 microsaniye bekle digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); // echo pin oku duration = pulseIn(echoPin, HIGH); // Mesafe hesaplanıyor distance= duration*0.034/2; // Prints the distance on the Serial Monitor Serial.print("Mesafe: "); Serial.println(distance); delay(100); }