• Deneyap Relay has a 10 channel capacitive touch keypad.
• It has a Texas Instruments MSP430G2352 microprocessor.
• Apart from the I2C communication interface, you can receive data from the capacitive sensing interface of your development card by using the module's pins.
• The module has 2 I2C communication connectors (JST SH 4 pin 1 mm).
• You can connect the modules to each other easily and quickly in a chain arrangement.
• You can use it compatible with all Deneyap development cards.
• Breadboard compatible; However, since its pins have a capacitive sensing interface, it should not be used on the breadboard.
• Arduino Uno, Raspberry Pi Pico, etc. without I2C communication connector. You can connect development cards to each other via their pins.
• It is suitable for coding with Arduino IDE.
• Electronic modules and development boards with Adafruit Stemma QT and Sparkfun Qwiic communication connectors can work together.

Working Voltage: 3.3V
Size: 25.4mm x 50.8mm
Weight: 5 g (pins soldered)

I2C Address:

• 0x0E default address
• 0x4C Address when ADR1 is short-circuited
• 0x71 Address when ADR2 is short-circuited
• 0x72 Address when ADR1 and ADR2 are short-circuited

One 10 cm long I2C connection cable is supplied with the product.

Documents

• Schematic
• Datasheet Texas Instruments MSP430G2352
• Arduino IDE Examples and Library
• Technical Drawing
• 3B Model (.stl)
• 3B Model (.step)
• Fritzing