DENEYAP Kart 1A v2

General Information

The most powerful electronic development board of the Deneyap family was developed using the ESP32-S3-WROOM-1 module.

With the new generation powerful dual-core Xtensa LX7 microprocessor, you can start machine learning and AI-based projects with Tensorflow Lite.

Thanks to its built-in Wi-Fi and Bluetooth communication features, it will enable you to prepare internet of things and cloud-based projects.

You can exchange data between your system and your cloud-based application using the Wi-Fi communication feature. In addition, you can use your card as a server and thus set up your own closed-loop wireless communication network.

It has a rich range of peripheral connections such as ADC, PWM, UART, SPI, I2C, TWAI, I2S, Capacitive Sensing, LCD, DVP, RMT, SD/SDIO/MMC, JTAG, Timer, pulse counter and external interrupt. Additionally, to provide you with flexibility, some of these connection interfaces can be used from any pin you want according to your needs.

There is an internal temperature meter integrated into the microprocessor.

It has 23 pins that can be used for general purposes.

A dedicated Li-Po connection connector is included to help you reliably power your system. Moreover, you can charge your Li-Po battery using this connection connector. You can also monitor the charge of the connected battery.

On the back of the card, there is a micro SD card connector and an FPC camera connector to which you can connect the Deneyap Camera.

There are also 2 buttons and 1 addressable RGB LED built-in.

By using the I2C communication connector, you can quickly implement your system consisting of sensor and actuator units without wiring or soldering.

You can get 3.3V and 5V voltage output from your card to use in peripherals to which you will provide an uninterrupted external connection. Even when powering your system with a Li-Po battery, the power output with 5V voltage will always be with you.

Desenap Kart 1A v2 has a design compatible with breadboard. The pins are soldered for you so you can start developing right away.

Deneyap Kart 1A v2 is compatible with Arduino IDE. You can start coding using the instructions.

With the AI accelerator of the new generation LX7 processor of Deneyap Kart 1A v2, signal processing and machine learning performance has been strengthened compared to the first version.

Deneyap Kart 1A v2 has Bluetooth 5 version instead of Bluetooth 4.2 version; In this way, it can exchange data with long-range (1 km and above) Bluetooth communication called Coded PHY.

The flash and RAM capacity of Deneyap Kart 1A v2 can be increased up to 1GB if desired.

While the first version, Deneyap Kart 1A, had a magnetic field (hall) sensor, the new version has a built-in temperature meter.

Technicial Specifications

  • 240 MHz Dual Core Tensilica LX7 Microprocessor
  • 512 KB SRAM
  • 384KB ROM
  • 8MB Octal SPI PSRAM
  • 4MB Quad SPI Flash
  • 2.4GHz Wi-Fi – 802.11b/g/n
  • Bluetooth LE (5 and Mesh)
  • Internal PCB Antenna
  • Internal Temperature Meter
  • Addressable RGB LED (Pin: D9)
  • SD Card (Pins: D16, D17, D18 and D19)
  • General Purpose Button (Pin: D15)
  • Battery Voltage Sensor (Pin: A8)
  • Li-Po Battery Charging
  • Li-Po Battery Connector
  • Type-C USB Connector
  • I2C Communication Connector
  • 23 x Digital Input/Output Pins
  • 13 x Analog Input Pin (12-bit ADC)
  • 9 x Capacitive Sensing Pin
  • All Digital Input Pins Support PWM, UART, SPI, I2C, TWAI, I2S, LCD, DVP, RMT, SD/SDIO/MMC, Pulse Counter and External Interrupt
  • 3.3V Operating Voltage
  • 3.3V and 5V Output Voltage
  • 3.3V – 5.5V Input Voltage
  • 63.50mm x 25.4mm x 15.70mm
  • 11 g (pins soldered)



Documents