• Deneyap Control Arm produces analog values on two axes and has one button.
• It houses the joystick and the ST Microelectronics STM8S003F3 microprocessor.
• Apart from the I2C communication interface, you can also receive data from the digital and analog outputs on the pins.
• The module has 2 I2C communication connectors (JST SH 4 pin 1 mm).
• You can connect the modules to each other easily and quickly in a chain arrangement.
• You can use it compatible with all Deneyap development cards.
• It is breadboard compatible.
• Arduino Uno, Raspberry Pi Pico, etc. without I2C communication connector. You can connect development cards to each other via their pins.
• It is suitable for coding with Arduino IDE.
• Electronic modules and development boards with Adafruit Stemma QT and Sparkfun Qwiic communication connectors can work together.

Working Voltage: 3.3V
Size: 25.4mm x 38.1mm
Weight: 10 g (pins soldered)

I2C Address:

• 0x1A default address
• 0x1B Address when ADR1 is short-circuited
• 0x1C Address when ADR2 is short-circuited
• 0x1D Address when ADR1 and ADR2 are short-circuited

One 10 cm long I2C connection cable is supplied with the product.

Documents

• Schematic
• Datasheet ST Microelectronics STM8S003F3
• Arduino IDE Examples and Library
• Technical Drawing
• 3B Model (.stl)
• 3B Model (.step)
• Fritzing