• Deneyap 9-Axis Inertial Measurement Unit provides accelerometer information in the range of ±2/±4/±8/±16 g, gyroscope in the range of ±125/±250/±500/±1000/±2000 dps, and caliper information in the range of ±30 G.
• It features ST Microelectronics LSM6DSM 3-axis accelerometer and 3-axis gyroscope with Memsic MMC5603NJ 3-axis caliper.
• The module has 2 I2C communication connectors (JST SH 4 pin 1 mm).
• You can connect the modules to each other easily and quickly in a chain arrangement.
• You can use it compatible with all Deneyap development cards.
• It is breadboard compatible.
• Arduino Uno, Raspberry Pi Pico, etc. without I2C communication connector. You can connect development cards to each other via their pins.
• It is suitable for coding with Arduino IDE.
• Electronic modules and development boards with Adafruit Stemma QT and Sparkfun Qwiic communication connectors can work together.

Working Voltage: 3.3V
Size: 25.4mm x 25.4mm
Weight: 2g (pins soldered)

I2C Address:

• 0x60 default address (3-axis Magnetometer)
• 0x6B default address (6-axis Accelerometer and Gyroscope)
• 0x6A LSM_ADR address when soldered (6-axis Accelerometer and Gyroscope)

One 10 cm long I2C connection cable is supplied with the product.

Documents

• Schematic
• Datasheet Memsic MMC5603NJ
• Datasheet ST Microelectronics LSM6DSM
• Arduino IDE Examples and Library
• Technical Drawing
• 3B Model (.stl)
• 3B Model (.step)
• Fritzing