Deneyapkart

DENEYAP Kart G

General Information

Desenap Kart G is an electronic development card specific to wearable technologies with its sewable pads. It was developed using the original ESP32-C3 integrated microprocessor.
Thanks to its built-in Wi-Fi and Bluetooth communication features, it will enable you to prepare internet of things and cloud-based projects.
You can establish a closed-loop wireless communication network by using Deneyap Kart G as a server.
It has a rich range of peripheral connections such as ADC, USB OTG, PWM, SPI, UART, I2S, I2C, TWAI, GDMA, JTAG and IR. Additionally, to provide you with flexibility, some of these connection interfaces can be used from any pin you want according to your needs.
With the internal temperature sensor integrated into the microprocessor, you can monitor the device temperature between –40 °C and +125 °C.
By using the I2C communication connector, you can quickly implement your system consisting of sensor and actuator units without wiring or soldering.
A dedicated Li-Po connection connector is included to help you reliably power your system. Moreover, it has a switch to turn on and off the voltage from the battery.
Additionally, there are 2 buttons and 1 addressable RGB LED built-in.
It has 13 pins that can be used for general purposes.
Deneyap Kart G has a total of 11 sewable pads, 6 of which are signal and 5 voltage.
It has a design compatible with a breadboard.
Compatible with Arduino IDE. You can start coding using the instructions.

Technicial Specifications

Documents