• Deneyap Microphone measures up to 132 dB sound level at 67 dBA signal/noise ratio with ±1 dB sensitivity.
• It features the TDK InvenSense ICS-40619 sensor, TI TL971IDR operational amplifier and ST Microelectronics STM8S003F3 microprocessor.
• Apart from the I2C communication interface, you can also receive data from the analog output on the pins.
• The module has 2 I2C communication connectors (JST SH 4 pin 1 mm).
• You can connect the modules to each other easily and quickly in a chain arrangement.
• You can use it compatible with all Deneyap development cards.
• It is breadboard compatible.
• Arduino Uno, Raspberry Pi Pico, etc. without I2C communication connector. You can connect development cards to each other via their pins.
• It is suitable for coding with Arduino IDE.
• Electronic modules and development boards with Adafruit Stemma QT and Sparkfun Qwiic communication connectors can work together.

Working Voltage: 3.3V
Size: 25.4mm x 25.4mm
Weight: 3 g (pins soldered)

I2C Address:

• 0x35 default address
• 0x36 Address when ADR1 is short-circuited
• 0x37 Address when ADR2 is short-circuited
• 0x38 Address when ADR1 and ADR2 are short-circuited

One 10 cm long I2C connection cable is supplied with the product.

Documents

• Schematic
• Datasheet TDK InvenSense ICS-40619
• Datasheet TI TL971IDR
• Datasheet ST Microelectronics STM8S003F3
• Arduino IDE Examples and Library
• Technical Drawing
• 3B Model (.stl)
• 3B Model (.step)
• Fritzing