• Deneyap Speaker provides 89dB sound output with 3dB sensitivity in the frequency range of 600Hz-20kHz.
• It houses the Diodes PAM8302A amplifier and the PUI Audio AS01508MS-SC11-WP-R speaker.
• Using the module pins, you can receive data from your development board's DAC output or PWM interface.
• The module has 2 I2C communication connectors (JST SH 4-pin 1 mm); However, these connectors are not used to exchange data with the speaker module via the I2C interface, but to provide power to the module and to continue the chain sequence with other modules.
• You can connect the modules to each other easily and quickly in a chain arrangement.
• You can use it compatible with all Deneyap development cards.
• It is breadboard compatible.
• Arduino Uno, Raspberry Pi Pico, etc. without I2C communication connector. You can connect development cards to each other via their pins.
• It is suitable for coding with Arduino IDE.
• Electronic modules and development boards with Adafruit Stemma QT and Sparkfun Qwiic communication connectors can work together.

Working Voltage: 3.3V
Size: 25.4mm x 25.4mm
Weight: 3 g (pins soldered)

One 10 cm long I2C connection cable is supplied with the product.

Documents

• Schematic
• Datasheet Diodes PAM8302A
• Datasheet PUI Audio AS01508MS-SC11-WP-R
• Arduino IDE Examples and Library
• Technical Drawing
• 3B Model (.stl)
• 3B Model (.step)
• Fritzing