Warnings (DY1Av2)

Pin Conflict

  • While the Deneyap Camera is connected, do not make any external connections to the camera pins.
  • When using internal RGBLED, do not make any external connections to pin D9.
  • If an external connection is provided via the I2C connector, an external connection can be made to the D10 (SDA) and D11 (SCL) pins with the I2C interface with the same pin configuration; However, do not make any external connections to these pins.

Assembly

When removing your card, which is placed on a breadboard or similar unit, you need to carefully remove it by holding the edges as shown in the image, in order to prevent damage to the USB port.